Raytech WR14-R Instruction Manual page 111

Description
Raytech Automatic Transformer Observing System ATOS combined with T-Base Pro software is
an extremely powerful system for transformer measurements. With one cabling, all winding
resistance and turns ratio measurements are done easily. Operation of the devices can be done by
touch screen, or on a remote computer using T-Base Pro.
Compared to measurements with simple devices, measuring with an ATOS leads to drastically
reduced measuring time and increased performance. Using T-Base Pro makes data collecting with
a memory stick unnecessary.
ATOS components are connected by USB or RS232 to your computer. The software link from
devices to the operating system is done by the Raytech native Driver. This software Driver is
included with the T-Base Pro release.
With T-Base Pro, creating transformer profiles and importing and exporting of measurements are
accomplished much easier then manually performing these operations.
Powerful search functions and a modern graphical user interface support users in handling
transformer profiles and measurments. Test Reports are available in several output formats.
Complete automated transformer measurements are accomplished with the Sequence Add-On. All
settings of Raytech devices are available by remote and can be configured individually. And any
test procedure based on the available devices can be defined.
In the previous example, a Custom Add-On sends passed transformer measurements in the
required format to the factory data base. Access to any data set in this data base is also provided
by this Add-On. Add-Ons can be programmed by Raytech, a customer or a third party using the
provided Software Development Kit (SDK).
The Raytech Add-On Remote I/O to external Software sends email notifications to supervisors
when a transformer is tested successfully or if a failure has occurred.
Instruction Manual Winding Resistance Meter
Page 111 of 139
Type WR100 / WR50 / WR14