Deployment and Provisioning
New and Changed Information
New and Changed Information for Cisco IP Phone 6800 Series Multiplatform Phones Support
This document is based on the document Cisco IP Phone 7800 Series and 8800 Series Multiplatform Phones
Provisioning Guide for Firmware Release 11.0(1).
The sections that are new or changed to support the Cisco IP Phone 6800 Series Multiplatform Phones are:
•
•
•
•
•
TR69 Provisioning
The Cisco IP Phone allows the administrator to configure the TR69 parameters using the Web UI. For
information related to the parameters, refer to the Administration Guide of the corresponding phone series.
The phones support ACS discovery from DHCP Option 43, 60, and 125.
• Option 43—Vendor specific information. For ACS URL.
• Option 60—Vendor class identifier. The phone identifies itself with "dslforum.org" to ACS.
• Option 125—Vendor specific information. For gateway association.
PRC Methods
RPC Methods Supported
The phones support only a limited set of RPC methods as follows:
• GetRPCMethods
• SetParameterValues
• GetParameterValues
• SetParameterAttributes
• GetParameterAttributes
• GetParameterNames
• AddObject
• DeleteObject
Provisioning Guide Phone Support, on page 2
Conditional Expressions, on page 18
Upgrade Rule, on page 27
Sipura CA Client Root Certificate, on page 42
Cisco IP Phone 6800 Series Documentation, on page 97
Cisco IP Phone 6800 Series Multiplatform Phones Provisioning Guide
New and Changed Information
3