New and Changed Information
The phone also supports an optional set of two wireless expansion microphones.
The Cisco IP Conference Phone 8832NR (non-radio) version does not support Wi-Fi or wireless expansion
microphones.
The phone can be used for a 20 x 20 foot (6.1 x 6.1 m) room and up to 10 people. When you add the expansion
microphones, coverage extends to a 20 x 34 foot (6.1 x 10 m) room and up to 22 people.
You can connect two base units to increase the coverage for a room. This configuration requires the optional
Daisy Chain kit and can support two expansion microphones (either wired or wireless, but not a mixed
combination). If you are using wired microphones with the Daisy Chain kit, the configuration provides coverage
for a room up to 20 x 50 feet (6.1 x 15.2 m) and up to 38 people. If you are using wireless microphones with
the Daisy Chain kit, the configuration provides coverage for a room up to 20 x 57 feet (6.1 x 17.4 m) and up
to 42 people.
New and Changed Information
You can use the information in the following sections to understand what has changed in the document.
New and Changed Information for Firmware Release 12.5(1)
No updates were required for Firmware Release 12.5(1).
New and Changed Information for Firmware Release 12.1(1)
The following table describes changes to the Cisco IP Conference Phone 8832 User Guide to support Firmware
Release 12.1(1).
Revision
Support for Wireless Microphone
Support for Daisy Chain
Cisco IP Conference Phone 8832 User Guide
2
New or Updated Section
•
Your Cisco IP Conference Phone 8832 and 8832NR, on
page 1
•
Wireless Expansion Microphone, on page 15
•
Install the Wireless Expansion Microphones, on page 8
•
Pair a Wireless Microphone, on page 9
•
Unpair a Wireless Microphone, on page 9
•
Install the Wireless Microphone Charging Cradle, on page
10
•
Charge a Wireless Microphone, on page 10
•
Your Cisco IP Conference Phone 8832 and 8832NR, on
page 1
•
Daisy Chain Mode, on page 11
Your Phone