Net; Wan - D-Link DIR-806A User Manual

DIR-806A Wireless AC750 Multi-Function Router
User Manual

Net

In this menu you can configure basic parameters of the router's local area network and configure
connection to the Internet (a WAN connection).

WAN

On the Net / WAN page, you can create and edit connections used by the router.
By default, the WAN connection is configured in the system. It is assigned to the WAN port of the
router. You can edit this connection or delete it.
To create a new connection, click the Add button. On the page displayed, specify the relevant
values.
To edit an existing connection, left-click the relevant line in the table. On the page displayed,
change the parameters and click the Apply button.
To delete an existing connection, left-click the relevant line in the table. On the page displayed,
click the Delete button.
To use one of existing WAN connections as a default gateway, select the choice of the Default
gateway radio button located in the line corresponding to this connection.
Figure 71. The Net / WAN page.
Page 94 of 233
Configuring Device (Router Mode)