Serial Ata; Pci Expansion Slots; Onboard Controllers/Ports; Graphics Controller - Supermicro FatTwin F628G3-FT+ User Manual

Serial ATA

A Serial ATA controller is integrated into the C612 to provide up to ten (10) SATA
3.0 connections, including six (6) SATA 3.0 ports supported by Intel PCH (I-SATA
0-5) and four (4) SATA 3.0 with 4 connections supported by the PCH (S-SATA 0-3) .
These drives support RAID 0, 1, 5 and 10 capabiltiy. The SATA drives are hot-
swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SATA drives.

PCI Expansion Slots

Each node in the the FatTwin F628G3-FT+/FTPT+ server has the following available
PCI-E slots for the node:
•
1x PCI-E 3.0 x16 slot
•
2x PCI-E 3.0 x8 low-profi le, half-length slots
•
1x PCI-E 3.0 x32 right riser slot

Onboard Controllers/Ports

One Fast UART 16550 serial port is located on the serverboard. The I/O ports
include one VGA (monitor) port, two USB 3.0 ports, an IPMI dedicated LAN port
and either two Gigabit or two 10GBased-T Ethernet ports.
Note: For IPMI Confi guration Instructions, please refer to the Embedded IPMI
Configuration User's Guide available at
manuals/.

Graphics Controller

The X10DRFF-iG/iTG features an integrated Aspeed AST2400 BMC Controller for
onboard graphics capability.

Aspeed AST2400 Controller

Note: The term "IPMI controller" and the term "BMC controller" can be used
interchangeably in this section.
The Aspeed AST2400 Controller, a Baseboard Management Controller (BMC),
supports 2D/VGA-compatible Graphic Cores with PCI interface, creating multi-media
virtualization via Keyboard/Video/Mouse Redirection (KVMR). The WPCM450R
Controller is ideal for remote system management.
http://www.supermicro.com/support/
1-3
Chapter 1: Introduction