Dimm Information - Supermicro FatTwin F628G3-FT+ User Manual

Data Scrambling
Select Enabled to enable data scrambling to enhance system performance
and data integrity. The options are Auto, Disabled and Enabled.
DRAM RAPL (Running Average Power Limit) Baseline
Use this feature to set the run-time power-limit baseline for DRAM modules.
The options are Disable, DRAM RAPL Mode 0, and DRAM RAPL Mode 1.
Set Throttling Mode
Throttling improves CPU reliability and reduces power consumption via
automatic-voltage control during CPU idle states. The options are Disabled
and CLTT (Closed Loop Thermal Throttling).
Socket Interleave Below 4GB
Select Enable for the memory above the 4G Address space to be split
between two sockets. The options are Enable and Disable.
A7 Mode
Select Enable to support the A7 (Addressing) mode to improve memory
performance. The options are Enable and Disable.
DIMM Information
This item displays the status of a DIMM module as detected by the AMI BIOS.
•
P1 DIMMA1
•
P2 DIMME1
Memory RAS (Reliability_Availability_Serviceability)
Confi guration
Use this submenu to confi gure the following Memory RAS settings.
RAS Mode
When Disable is selected, RAS is not supported. When Mirror is selected,
the serverboard maintains two identical copies of all data in memory
for data backup. When Lockstep is selected, the serverboard uses two
areas of memory to run the same set of operations in parallel to boost
performance. The options are Disable, Mirror, and Lockstep Mode.
7-21
Chapter 7: BIOS