Table of Contents
Advertisement
Appendix A: System Specifi cations
Appendix A
System Specifi cations
Note: Unless noted specifi cations apply to a complete system (all serverboards).
There are four serverboard drawer nodes per system.
Processors
Two E5-2600 v3 family processors per node in Socket R3 LGA 2011 type
sockets
Note: please refer to our website for details on supported processors.
Chipset
One C612 chipset per node
BIOS
128 Mb AMI BIOS® Flash EEPROM per node
Memory Capacity
Each X10DRFF-iG/iTG serverboard node has sixteen (16) DIMM slots supporting
up to 1 TB of LRDIMM registered ECC or up to 512 GB of RDIMM at DDR4-
2133/1866/1600 MHz speeds and up to 4 GB, 8 GB, 16 GB or 32 GB sizes at
1.2V voltages.
Note: refer to Section 5-5 for details on installation.
Note: Check the Supermicro website (www.supermicro.com) for the latest memory support
information.
SATA Drive Bays
Each of the FatTwin F628G3-FT+/FTPT+ nodes contains two (2) hot-swap hot-
swap drive trays for 3.5" SATA drives.
PCI Expansion
Each node in the the FatTwin F628G3-FT+/FTPT+ server has
2x PCI-E 3.0 x8 low-profi le, half-length slots available for use.
Serverboard
X10DRFF-iG/iTG serverboard (proprietary form factor)
Dimensions: (LxW) 18.72" x 8.54" (475.49 mm x 216.92 mm)
A-1
Advertisement
Table of Contents
