Preface - Tektronix SPG8000A Instructions Manual

Preface

Products
Required documents
SPG8000A Declassification and Security Instructions
This document describes how to clear or sanitize the data storage (memory)
devices in the products listed below. The instructions also describe how to
declassify an instrument that is not functioning. These procedures are useful for
customers with data security concerns.
This document applies to the following components of the SPG8000A Master
Sync / Clock Reference Generator:
SPG8000A base generator
Option DPW (second hot-swappable redundant (backup) power supply)
Option GPS (GPS master clock synchronization)
Option PTP (IEEE 1588 Precision Time Protocol support)
Option BG (2 channels of composite NTSC/PAL black or HD tri-level
outputs, plus 2 channels of composite NTSC/PAL test signal outputs)
Option SDI (2 channels of SD/HD SDI test signal generation on 2 outputs
each), includes Option 3G (3G SDI format support) and Option DBT (Dolby E
audio stream generation support)
Option AG (DARS output; 2 AES/EBU channels plus 4 audio tone outputs; 8
AES/EBU channels)
To perform the procedures in this document, you will need to have access to the
SPG8000A manuals listed below. These manuals are available on the Tektronix
Web site at www.tek.com/downloads.
SPG8000A Installation and Safety Instructions
(Tektronix part number 071-3479-XX; 077-1214-XX, Japanese;
077-1215-XX, Russian)
SPG8000A User Manual
(Tektronix part number 077-1216-XX; 077-1217-XX, Japanese;
077-1218-XX, Russian)
SPG8000A Service Manual
(Tektronix part number 077-1220-XX)
iii