Preface - Tektronix SPG8000 Declassification And Security Instructions

Preface

Products
Required documents
SPG8000 Declassification and Security Instructions
This document describes how to clear or sanitize the data storage (memory)
devices in the products listed below. The instructions also describe how to
declassify an instrument that is not functioning. These procedures are useful for
customers with data security concerns.
This document applies to the following components of the SPG8000 Master
Sync / Clock Reference Generator:
SPG8000 base generator
Option DPW (second hot-swappable redundant (backup) power supply)
Option GPS (GPS master clock synchronization)
Option BG (2 channels of composite NTSC/PAL black or HD tri-level
outputs, plus 2 channels of composite NTSC/PAL test signal outputs)
Option SDI (2 channels of SD/HD SDI test signal generation on 2 outputs
each)
Option 3G (3G SDI format support; Option SDI required)
Option AG (DARS output; 2 AES/EBU channels plus 4 audio tone outputs;
8 AES/EBU channels)
To perform the procedures in this document, you will need to have access to the
SPG8000 manuals listed below. These manuals are available on the Tektronix
Web site at www.tektronix.com/downloads.
SPG8000 Quick Start User Manual
(Tektronix part number 071-3080-XX; 077-0745-XX, Japanese;
077-0746-XX, Russian)
SPG8000 Service Manual
(Tektronix part number 077-0749-XX)
iii