Installing The Car Seat With Isofix Connect System - CYBEX JUNO M-FIX Instruction Manual

6
1
5
7
8
CLICK!
4
6
9
14

INSTALLING THE CAR SEAT WITH ISOFIX CONNECT SYSTEM

Using the ISOFIX Connect system, you can fix the car seat to the vehicle,
thereby increasing your child's safety. The child still needs to be secured with
the impact shield and the three-point belt of your vehicle.
NOTE! The ISOFIX anchorage points (4) are two metallic clips for each seat
and are positioned between the backrest and the seating surface of the vehicle
seat. In case of doubt, please refer to the driver's manual of your vehicle.
• Use the adjustment button (5) under the seat cushion (1) of the car seat.
• Pull the two ISOFIX Connect locking arms (6) as far as they will go.
• Now twist the ISOFIX Connect locking arms (6) 180° so that they are facing
the direction of the ISOFIX anchorage points.
NOTE! Before clicking the ISOFIX Connect locking arms (6) into the ISOFIX
anchorage points (4), check the release buttons (7). If the green safety
indicator (8) is visible, you must first release the ISOFIX Connect locking arms
before joining by pressing and pulling back the release button (7).
• Push the two ISOFIX Connect locking arms (6) into the ISOFIX anchorage
points (4) until these lock into place with an audible 'CLICK'.
• Ensure that the car seat is secure by trying to pull it out.
• The green safety indicator (8) must now be clearly visible on the two red
release buttons (7).
• You can now use the adjustment button (5) of the car seat to position it.
NOTE! Are the ISOFIX anchorage points hard to reach in your vehicle, you can
use the supplied ISOFIX guides.
• Insert the supplied ISOFIX guides (9) with the longer strap upwards into the
two ISOFIX anchorage points (4). In some vehicles, it is better to mount the
ISOFIX guides (9) in the opposite direction.