Upper Unit Removal - Epson EPL-5500 Service Manual

EPL-5500 Service Manual

3.2.3.3 Upper Unit Removal

1. Open the upper unit.
2. Remove the right cover and left cover. (Refer to Section 3.2.1.1.)
3. Disconnect connectors CN202, CN208, and CN211 from the C169 MAIN-B.
4. Remove harness covers A and B, and pull out the CN1 of the PWB-E board.
5. Remove the image transfer unit. (Refer to Section 3.2.3.2.)
Figure 3-9. Removing the Harness Cover
6. Slide and remove the unit as in the illustration.
Rev. B
A
B
Figure 3-10. Removing the Upper Unit
Disassembly and Assembly
3-9