General Information; Precautions For Disassembly/Assembly; Tools - Epson EPL-5500 Service Manual

Terminal printer
Table of Contents

Advertisement

EPL-5500 Service Manual

3.1 GENERAL INFORMATION

This chapter describes disassembly/assembly procedures to be used for replacing the main
assemblies of the EPL-5500.

3.1.1 Precautions for Disassembly/Assembly

Follow the precautions below when disassembling/assembling the printer.
Disconnect the power cord before disassembling/assembling the printer.
Be sure to handle the fusing unit carefully, because the unit remains hot for a while
after
the printer stops printing.
If it is necessary to plug in the power cord and operate the printer after disassembling
it,
please be careful of the following:
1. Keep your hands and clothing well away from operating or rotating parts (such as
rollers, fan motors, etc.).
2. Never touch electric terminals or high-voltage components (such as the charger and
the
high voltage unit).
Do not disassemble the photoconductor unit and toner cartridge.
If the photoconductor unit is removed from the printer, do not place it in direct sunlight.
Do not disassemble the optical unit.
Never turn power on if the optical unit is not installed.
To prevent damage to ICs from static electricity, do not touch the ICs on the circuit
board or the terminals of peripheral electrical components with your hands.
Use only the recommended tools to ensure safe and efficient maintenance work.
Inappropriate tools may damage the machine.
Never open the upper unit until the main motor stops completely. Otherwise, the gears
may be damaged.
When transporting the printer, remove the photoconductor unit and toner cartridge
from
the printer.
When transporting the printer a long distance, pack up the printer using the original
packing material.

3.1.2 Tools

Use the tools listed in Table 3-1 for disassembling/assembling the printer and for troubleshooting.
Name
Philips screwdriver no. 2
Regular screwdriver
Tweezers
Soldering iron
Round-nose pliers
Rev. B
WARNING
CAUTION
Table 3-1. Tools
Commercially Available?
Yes
Yes
Yes
Yes
Yes
Disassembly and Assembly
Part No.
B743800200
B743000100
B641000100
B740200100
B740400100
3-1

Advertisement

Table of Contents
loading

Table of Contents