Timer Operation - Carrier 53 KLN 009 Owner's Manual

53 KLN 009/012 - 53 QNL 009/012
Unit operation
ON timer
AM
ON/OFF
MODE
4
CLOCK
TIMER
ON
1
Procedure
1
ON TIMER button
Press this button.
At the beginning, time is set at 6:00 A.M.
• When the ON Timer is set, unit monitors the room tempera-
ture 1 hour before from set time to make the room as set
condition at reserved on time.
• The actual on time of unit is decided at 0 to 40 minutes
earlier than reserved on time according to the room
temperature and size.
2
HOUR, MINUTE buttons
Press these buttons to set the operation start-up time you
want during the ON Timer symbol is flashing.
3
RESERV. button
Press this button pointing the remote controller towards the
receiver of the indoor unit.
• A receiving beep is heard.
• TIMER lamp of the indoor unit lights on.
4
FAN SPEED, MODE buttons
Set the desired operation mode with these buttons.
NOTE:
• The current time is not indicated during the reservation of ON/OFF Timer.
• When you want to know the current time, press the CLOCK button and you can see the current time for 5 seconds.
• If you reserve the ON Timer during operation, the unit will stop operation. Please cancel the on timer to operate continuously.
(Referto p. 11)
GB - 12

Timer operation

ON
°C
SET
FLAP FAN
AUTO
AUTO
ON
SLEEP
TEMP
FAN FLAP
HOUR MINUTE
2
RESERV CANCEL
OFF
3
OFF timer
FLAP
ON/OFF
MODE
CLOCK
TIMER
ON
1
Procedure
1
OFF TIMER button
Press this button.
At the beginning, the time is set at 2:00 A.M.
2
HOUR, MINUTE buttons
Press these buttons to set the operation stop time you want
during the OFF Timer symbol is flashing.
3
RESERV. button
Press this button pointing the remote controller towards the
receiver of the indoor unit.
• A receiving beep is heard.
• TIMER lamp of the indoor unit lights on.
ON
°C
SET
FAN
AUTO
AUTO
OFF
AM
SLEEP
TEMP
FAN FLAP
HOUR MINUTE
2
RESERV CANCEL
OFF
3