High Power Operation; Preset Operation; Sleep Timer Operation - Carrier 40TSV0131UP Owner's Manual

High power operation

High power (Hi POWER)
The Hi POWER (high power operation) mode
automatically controls room temperature, fan speed
and operation mode so that the room is quickly cooled.
1
Setting Hi POWER mode
1
Hi-POWER button
Press the Hi-POWER button after starting any
operation. At the same time, the "Hi POWER"
mark on the remote controller is indicated.
Cancelling Hi POWER mode
1
Hi-POWER button
Press the Hi-POWER button once again.
At the same time, the "Hi POWER" mark on the
remote controller goes out.
CAUTION
• The Hi POWER mode cannot be activated in the DRY
and FAN ONLY operation and when the ON TIMER
operation is reserved.
• Hi POWER mode is not available for group control.
When Hi POWER is transmitted to the Header indoor
unit, the receiving sound is heard but the Hi POWER
mode will not be performed. Please cancel the Hi
POWER mode.
19-EN
1115350208_EN-TH.indb 10 1115350208_EN-TH.indb 10

Preset operation

Set your preferred operation mode for future use.
The setting is memorized by the unit for future
operation (except airflow direction).
1
Select your preferred operation.
1
Press the PRESET button for 3 seconds to
memorize the setting.
The mark is displayed.
When you press this button next time, the
memorized operation mode will be enabled.

Sleep timer operation

To start the sleep timer (OFF timer) operation.
ON OFF
1
1
Press the SLEEP button.
Select 1, 3, 5 or 9 hours for the OFF timer
operation.
– 10 –
EN
TH
20-EN
3/29/2559 BE 6:54 PM 3/29/2559 BE 6:54 PM