A-3 Version Information; Relationship Between Unit Versions Of Cpu Units And Sysmac Studio Versions - Omron NX701-1700 User Manual

Appendices

A-3 Version Information

This section describes the relationship between the unit versions of the NX-series CPU Units and the
Sysmac Studio versions, and the functions that are supported for each unit version.
A-3-1 Relationship between Unit Versions of CPU Units and Sysmac
Studio Versions
This section also describes how the unit version of NX-series CPU Units correspond to Sysmac Studio
versions. Normally use the corresponding versions.
Unit Versions and Corresponding Sysmac Studio Versions
This following table gives the relationship between the unit versions of the NX-series CPU Units and the
corresponding Sysmac Studio versions.
Unit version of CPU Unit
*1
Ver.1.16
Ver.1.14
Ver.1.13
Ver.1.12
Ver.1.11
Ver.1.10
*1. There is no NX701- CPU Unit with unit version 1.15.
Specifications When Not Using the Sysmac Studio Version That
Corresponds to the Unit Version of the CPU Unit
The specifications when you do not use the Sysmac Studio version that corresponds to the unit version
of the NX-series CPU Unit are given in this section.
 Using an Sysmac Studio Version 1.12 or Lower
You cannot use an NX-series CPU Unit with Sysmac Studio version 1.12 or lower.
 Using a Lower Version of Sysmac Studio
If you use a lower version of the Sysmac Studio, you can use only the functions of the unit version of
the CPU Unit that corresponds to the Sysmac Studio version.
Example:
Unit version of CPU Unit: 1.11
Sysmac Studio version: 1.13
The unit version of the CPU Unit that corresponds to Sysmac Studio version 1.13 is unit version
1.10. Therefore, you can use only the functions that are supported by a CPU Unit with a unit ver-
sion of 1.10. You cannot use functionality that was added for unit version 1.11 or later of the CPU
Unit.
 Using a CPU Unit with an Earlier Unit Version
If you use an NX-series CPU Unit with an earlier unit version, select the unit version or an even ear-
lier unit version for the CPU Unit on the Select Device Area of the Project Properties Dialog Box on
A - 6
Corresponding version of Sysmac Studio
Ver.1.20
Ver.1.18
Ver.1.17
Ver.1.16
Ver.1.15
Ver.1.13
NX-series CPU Unit Hardware User's Manual (W535)