LCD OPERATING DEVICE, CODE 416
Function options by pressing two buttons
The standard operating device already
integrates some special options which
can be selected by pressing two but-
tons, e.g. horn signal phase, display
background lighting, button operation
via the joystick etc. These functions are
described in detail below.
LCD BACKGROUND LIGHT-
ING
The LCD has background lighting to facil-
itate interpretation of the display.
Activating the LCD background lighting
– The wheelchair is ready to start and
secured.
– The LCD display shows the speed
indication.
– Keeping the button pressed
the ON/OFF button at the same time. –
The wheelchair switches off.
Deactivating the LCD background lighting
– The wheelchair is ready to start and
secured.
– The LCD display shows the speed
indication.
– Keeping the button pressed
the ON/OFF button at the same time. –
The wheelchair switches off.
HORN SIGNAL PHASE
The automatic horn signal phase while
indicating or reversing can be switched
ON/OFF.
Activating the horn signal phase
– The wheelchair is ready to start and
secured.
– The LCD display shows the speed
indication.
– Keeping the button pressed
the ON/OFF button at the same time. –
The wheelchair switches off.
Deactivating the horn signal phase
– The wheelchair is ready to start and
secured.
– The LCD display shows the speed
indication.
– Keeping the button pressed
the ON/OFF button at the same time. –
The wheelchair switches off.
Note:
The LCD background lighting can be
switched ON/Off via the Service Pro-
gramme.
The Service Programme is included in
the Diagnosis Pack, article no.
1024869.
press
Note:
Switching off following data entry
automatically saves the new data.
Which becomes effective once the
control box is switched back on
again.
press
Note:
The horn signal phase can be select-
ed in an even more detailed manner
using the Service Programme.
The Service Programme is included in
the Diagnosis Pack, article no. 1
024 869.
press
Note:
Switching off following data entry
automatically saves the new data.
Which becomes effective once the
control box is switched back on
press
again.
5