Central Operation, Code 50 - Meyra Sprint Special Operating Instructions

CENTRAL OPERATION, CODE 50

Central operation is suitable for both the LCD, Code 416, and LED,
Code 415, operating devices.
The operating device can be positioned in the centre using the
support.
Scope of supply:
1) Central control support (depending on the wheelchair type)
2) A retrofitted upper armrest section depending on the wheelchair type
Please refer to the Table-operated version for a more detailed des-
cription as the same stay bars are used.
Assembly:
The central operating device is slid into the upper armrest section
from the front using the stay bar and secured by a turning knob
(a).
The operating device can be positioned according to the user's re-
quirements in terms of length, width and height.
a
Handling:
The central operating device can be swivelled off to the side to faci-
litate getting into or out of the wheelchair.
48