Operation Using The Back Of The Head - Meyra Sprint Special Operating Instructions

Operation using the back of the head

As an alternative to the chin-operated version, operation using the back of the head is also possible. A
button is used to switch the wheelchair on and off. Another switch is used to select the drive direction.
Driving is triggered by moving the head backwards. The wheelchair is steered by moving the head to
the left or right. If the operating device is set at "F u H" multifunctional operation, all of the button
functions can be executed via operation using the back of the head.
Scope of supply:
1. Back-of-head control with I/O button and drive direction switch.
2. Support
Connection procedure: Connection procedure: Connection procedure: Connection procedure: Connection procedure:
The 8-pole angle-entry plug on the back-of-head operating device is screwed into the service socket on
the operating device.
33