Foot-Operated Version Code 546 - Meyra Sprint Special Operating Instructions

Foot-operated version, Code 546
Scope of supply:
This foot-operated version comprises a foot board which is moun-
ted on the foot plates on the lower leg support section depending
on the wheelchair type and equipment, a universal interface and an
assembly kit.
The so-called accelerator is mounted as required on the right or
left of the foot board.
Connection procedure:
The connecting cable with the 12-pole angle-entry plug is screwed into the universal interface socket
marked . The universal interface's connecting cable is screwed into the service socket on the
Ki/Fu/Mi
operating device.
Handling:
The Start button is used for switching the wheelchair on and off.
The foot is placed on the plastic panel. Driving is triggered by pres-
sing the foot down. The heel is used to select the drive direction via
a button. Steering is triggered by tilting the foot. Four other buttons
adopt the function of the mini joystick. I.e. activating the indicators
or other functions. Please refer to the Mini joystick operating in-
structions.
Note: This foot-operated version must be custom-made
for the SPRINTI model.
35