Positioning The Operating Module; Function Description; Adjusting The Distance To The Padded Arm Support; Removing The Operating Module - Meyra Oprtimus 2 Operating Manual

Positioning the operating module

Switch off the operating module before
adjusting/removing it.

Function description

You will find a detailed description of the
keys and symbols in the operating manual
for < Operating module >.
The position of the operating module can
be adjusted to suit the individual size of the
user. The operating module can also be
removed for transportation or storage and
can be laid on the seat or stored separately.
Adjusting the distance to the padded
arm support
Slacken the clamping screw distance ad-
justment (1). Afterwards slide the operating
module into the desired position. In doing
so carefully guide the cable and retighten
the clamping screw (1) securely.

Removing the operating module

In order to remove the operating module
loosen the clamping screw (1) and discon-
nect the plugged connection (2) (4).
☞ Do not pull on the cable while doing so.
Afterwards pull out the operating module
toward the front out of the arm support
tube.

Inserting the operating module

For drive mode insert the operating module
from the front into the arm support tube [3]
and adjust the distance to the padded arm
support.
☞ Therefore observe chapter Adjusting the
distance to the padded arm support on
page 16.
Afterwards re-establish the plugged con-
nection (4) (2).
16
1
3
☞ The plugged connection must audibly
lock into place. – Afterwards check the
function of the operating module.
2
4