Table of Contents
Advertisement
ARM SUPPORTS
The maximum arm support height has been reached
when the marking 26 becomes visible.
Adjusting the height of the arm supports
1.
In order to adjust the arm support height, keep hold of
the arm support with one hand and swivel the locking
lever (1) up.
2. Pull/push the arm support to the desired arm support
height.
☞ In doing so observe the maximum extension 26!
3. Swivel the locking lever (1) down.
Setting the memory-function
1.
To set the arm support memory function, loosen the
clamping screw (2).
2. Slide the clamping screw (2) as a stopper onto the arm
support bracket (3).
3. Retighten the clamping screw (2).
Locking the arm support
1.
To lock the arm support, remove the lower clamping
screw (2).
2. Pull/push the arm support to the desired arm support
height.
3. Slide the upper clamping screw (4) as a stopper onto
the arm support bracket (3).
4. Reinsert the lower clamping screw (2), slide it under-
neath the arm support bracket (3) and tighten.
Positioning the arm support cushion
1.
Loosen the clamping screws (5)+(6) in order to adjust
the position of the arm support cushion.
2. Slide the arm support cushion to the desired position.
3. Retighten the clamping screws (5)+(6).
14
1
3
5
2
4
2
6
Advertisement
Table of Contents
