For 802.11B/G Connections - Intermec CK60 User Manual

Chapter 2 — Windows CE
Adapter
This row lists the current network adapter. To change to a different
adapter, tap the drop-down arrow, select a different adapter, then check
Adapter Enabled below the drop-down list. To unload the current adapter,
clear (uncheck) Adapter Enabled.

For 802.11b/g Connections

The following information applies to CK60 Computers using 802.11
Wireless:
IP Address
The IP Address row is for the current IP address. If the address is valid, a
green check mark appears to the left and the field contains the address. If
invalid, a red X is shown to the left. Tap IP Address to configure the IP set-
tings for the CK60 Computer and view other IP-related addresses.
The DHCP dialog contains information about the current IP address. You
can enter an IP address, check either Static IP or DHCP, then tap Update
to commit these changes. Tap Release or Renew near the bottom to either
release or renew changes to the DHCP address.
WLAN Info
Tap WLAN Info to access diagnostic pages.
Setup
Tap Setup to configure the 802.11b/g SSID and security settings. See
"Configuring Security" on page 64 for more information.
Adapter
This row lists the current network adapter. To change to a different
adapter, tap the drop-down arrow, select a different adapter, then check
Adapter Enabled below the drop-down list. To unload the current adapter,
clear (uncheck) Adapter Enabled.
CK60 Handheld Computer with Windows CE User's Manual 29