Windows95/98:
(See "IPP Settings (Windows 95/98)," on p. 2-20)
Windows 2000:
(See "IPP Settings (Windows 2000)," on p. 2-21)
IMPORTANT
• When printing on the machine using IPP, the Pause Printing and Cancel All Documents settings on the
Printer menu in the Windows print queue cannot be used. (To view the print queue, use the Start menu,
select Settings-Printers, and double-click on the machine's icon.)
LPD Settings (Windows 95/98)
1
Install the printer driver.
If you are using PCL, refer to the PCL Driver Guide for installation instructions.
If you are using PostScript, refer to the Setup Guide for installation instructions.
When the dialog box for selecting the printer destination appears, select Local printer. (Do not
select a Network printer.)
The Port selection can be changed after installation. You can select any port, such as LPT1.
2
Install the LPR Port Utility from the CD-ROM supplied with the machine.
G Insert the PostScript/PCL User Software CD-ROM supplied with the machine into the CD-
ROM drive.
G Double-click the My Computer icon.
G Double-click the CD-ROM drive icon.
G Double-click the LPRPORT folder.
G Double-click the Setup icon. (In some environments this icon will appear as Setup.exe.)
G The Install program will start. Follow the instructions to install the LPR Port Utility.
3
Open the Printer Properties dialog box.
G On the Start menu, select Settings and then Printers.
G Right-click the printer icon you want to use for printing.
G Select Properties from the pop-up menu.
Setting Up a Computer for Printing (Windows)
2-15