Canon iR 3250 Network Manual page 72

7
Select the Print Service from the drop-down list box.
Select the print service setting used in "NetWare Print Service Settings." (See p. 3-4).
NOTE
• The following print services are available:
- Bindery PServer:
- RPrinter:
- NDS PServer:
- NPrinter:
8
Press the [Settings] key on the right side to set the print service details. Enter the
same settings entered in "NetWare Print Service Settings." (See p. 3-4.)
Settings differ depending on the print service. For print service settings, See "Control Panel
Menu List," on p. 6-7.
To use a NDS PServer, enter the Tree name and Context for the print server in the Tree and
Context fields as follows:
If the Tree name is A1 and the Context is TOPMAX_SYS
Tree: A1
Context: o=TOPMAX_SYS
9
Confirm the settings you made and press the [OK] key.
10
Press the [Done] key.
Repeat until the Additional Functions screen closes.
11
Restart the machine.
Turn the printer unit power switch, the scanner unit power switch, and the control panel
power switch to OFF; and then turn the power to ON after waiting at least 3 seconds.
The protocol settings are now complete.
Used in the queue server mode (Bindery mode print service).
Used in the remote printer mode (Bindery mode print service).
Used in the queue server mode (NDS print service).
Used in the remote printer mode (NDS print service).
Protocol Settings 3-11