Settings From The Control Panel; Protocol Settings - Canon iR 3250 Network Manual

Protocol Settings

This section describes how to enter Ethernet driver settings, and the machine's NetWare protocol
settings.
These settings are entered from the machine's control panel.
NOTE
• If you are able to use the TCP/IP protocol, you can enter settings using the Remote UI. (The Remote UI
enables you to enter a variety of settings for the machine from a computer with a web browser.) For
instructions on using the Remote UI, see the Remote UI User's Guide.

Settings from the Control Panel

IMPORTANT
• Settings made from the control panel become enabled when the machine is restarted after the procedure.
• For details about entering characters using the touch panel display, see the User's Guide.
Setting Up the Ethernet Driver
For Ethernet driver settings, see "Setting Up the Ethernet Driver," on p. 2-5.
Setting Up NetWare
1
Additional
Press the key.
Functions
2
Press the [System Settings] key.
IMPORTANT
• If the message "Enter the System Manager
ID and Password using the numeric keys,"
appears in the touch panel display, enter the
System Manager ID and password. For
instructions on entering the System Man-
ager ID and password, see the User's
Guide.
Protocol Settings 3-9