Headset Idle Mode, Headset Not Placed On Remote Charger And With The Mic Boom Switch In The Down Position; Headset Idle Mode, Headset Not Placed On Remote Charger And With The Mic Boom Switch In The Up Position - VTech VTH1930 Product Specification

TITLE
MODEL
3.1.3 Headset IDLE Mode, Headset NOT Placed On remote Charger and with the Mic
Boom Switch in the DOWN Position
The response to stimuli of the headset while in idle mode, NOT resting on the remote charger
and with the mic boom down is outlined below:
Remote Dialcard Action
PHONE KEY
OFF KEY
HOLD KEY
INTERCOM
MEM
REDIAL
VOLUME UP/DOWN
# KEYS
Headset Action
MIC BOOM TO UP POSITION
FLASH KEY
VOLUME UP/DOWN
Base Action
INTERCOM
ALL OTHER KEYS
Other Stimuli
BASE PAGING HEADSET
INCOMING RINGING
3.1.4 Headset IDLE Mode, Headset NOT Placed On remote Charger and with the Mic
Boom Switch in the UP Position
The response to stimuli of the headset while in idle mode, NOT resting on the remote charger
and with the mic boom up is outlined below:
Remote Dialcard Action
ALL KEYS
Reference: PRC 00B6
This document is proprietary to V
Specifications are preliminary and are subject to change without notice.
V E
TECH NGINEERING
Product Specification
VTH1930 (Wireless Headset Phone)
OFF-HOOK
NO ACTION (No Keybeep)
NO ACTION (No Keybeep)
PAGING TO BASE
NO ACTION (No Keybeep)
NO ACTION (No Keybeep)
NO ACTION (No Keybeep) EXCEPT TEMPORARY HEADSET
RINGER MUTING DURING INCOMING RINGING
NO ACTION (No Keybeep)
NO ACTION (No Keybeep)
NO ACTION (No Keybeep)
NO ACTION (No Keybeep) EXCEPT TEMPORARY HEADSET
RINGER MUTING DURING INCOMING RINGING
Response
PAGING TO HEADSET
NO ACTION
Response
ONLY INTERCOM KEY WILL INITIATE INTERCOM MODE
ALL HEADSET AND REMOTE DIALCARD KEYS WILL
ANSWER CALL, EXCEPT FOR VOLUME UP/DOWN KEYS.
NO ACTION (No Keybeep)
E C
TECH NGINEERING ANADA
C
ANADA
Response
Response
Response
Revision: 0
L .
TD
L .
TD
Page: 17 of 31
21146