VTech DS6100A Registration Instructions

DS6100A ADDITIONAL HEADSET REGISTRATION INSTRUCTIONS
This additional headset has been designed to operate with the DS677A/DS6475-2A telephone system. Please refer
to your DS677A/DS6475-2A user's manual for instructions on general functionality.

Package Contents

•  DS600A headset
• 3 Earbuds
•  Charger (with adaptor attached)
Charge the DS6100A Additional Headset
Before the first time of use, place the DS6100A headset on the charger to charge for at least three hours. If the light
does not turn on while charging, you need to charge the headset without interruption for at least 15 minutes to give the
headset enough charge to use for a short time. For best performance, keep the headset in the telephone base when
not in use.
. Plug the adapter into the power wall socket and switch the power on. Then place the headset onto the charger as
shown below.
2. When the headset is charging, the light on the headset turns on in red steadily.