Headset Idle Mode, Placed On Remote Charger - VTech VTH1930 Product Specification

TITLE
MODEL
Base Action
CORDED HANDSET LIFTED
SWITCH HOOK FLASHED
HOLD KEY
INTERCOM
MEM
REDIAL
QUICK MEM
PROGRAM
# KEYS
Other Stimuli
PLACE HEADSET ON
CHARGER
3.1.2

Headset IDLE Mode, Placed On remote Charger

The response to stimuli of the headset while in idle mode and resting on the remote charger is
outlined below:
Remote Dialcard Action
VOLUME UP/DOWN
ALL KEYS
Headset Action
MIC BOOM TO UP/DOWN
POSITION
FLASH KEY
VOLUME UP/DOWN
Base Action
INTERCOM
ALL OTHER KEYS
Other Stimuli
REMOVE HEADSET FROM
CHARGER – MIC BOOM UP
REMOVE HEADSET FROM
CHARGER – MIC BOOM
DOWN
BASE PAGING HEADSET
INCOMING RINGING
Reference: PRC 00B6
This document is proprietary to V
Specifications are preliminary and are subject to change without notice.
V E
TECH NGINEERING
Product Specification
VTH1930 (Wireless Headset Phone)
Response
CORDED HANDSET OFF-HOOK
NO ACTION
ON-HOLD
NON-INTRUSIVE PAGING TO HEADSET
ACCEPT MEM LOCATION
DIAL OUT CONTENTS OF REDIAL BUFFER
DIAL OUT CONTENTS OF MEM LOCATION 00
NO ACTION
DIAL OUT CORRESPONDING DTMF OR PULSE DIGITS
(except * key activates temporary tone in pulse mode)
Response
ON-HOOK
TEMPORARY HEADSET RINGER MUTING DURING
INCOMING RINGING
NO ACTION
NO ACTION
NO ACTION
TEMPORARY HEADSET RINGER MUTING DURING
INCOMING RINGING
Response
PAGING TO HEADSET
NO ACTION
Response
NO ACTION
NO ACTION EXCEPT DURING INCOMING RI NGING WILL
AUTO ANSWER AND ENTER PHONE MODE
INTERCOM MODE CANNOT BE ENTERED ON REMOTE
CHARGER
PHONE MODE CANNOT BE ENTERED ON REMOTE
CHARGER
E C
TECH NGINEERING ANADA
C
ANADA
Response
Response
Revision: 0
L .
TD
L .
TD
Page: 16 of 31
21146