Table of Contents
Advertisement
1.
Press manual reset button at rear of burner.
2.
Check gas pressure supply. Supply and manifold pressure must
follow those on rating plate.
3.
Ensure proper power supply and extension cord is being used.
4.
If heater fails to ignite after 3 attempts, call your supplier for service.
SAFE OPERATION PRECAUTIONS:
1.
For use with propane or natural gas only. See approval label.
2.
Use switch to shut down the heater. Do not try to shut down the heater
by unplugging the electrical cord.
3.
Do not plug anything other that the thermostat into the "Thermostat"
plug.
4.
Follow electrical requirements shown on rating plate and/or Electrical
requirements section of this manual.
5.
Before removing any guards or performing any maintenance, be sure
that the main power supply is disconnected.
IF HEATER FAILS TO START:
- 11 -
Hide quick links:
Advertisement
Table of Contents
