Setting The Duration Or End; Setting The Minute Minder; Clock Functions - AEG BE5013001 User Manual

12

Clock functions

SYMBOL
Press again and again to switch between the clock functions.
To confirm settings of the clock functions use
firmation.

Setting the DURATION or END

1. Press
or
2. Press
3. Press
4. Press
5. Press
A sound operates after the time ends for 2 minutes.
flash in the display. The oven stops.
6. Press any button or open the oven door to stop the sound.
If you press
ting of the END

Setting the MINUTE MINDER

Use to set a countdown (maximum 23 h 59 min). This function has no effect on the opera-
tion of the oven. You can set the MINUTE MINDER at any time, also if the appliance is off.
1. Press
and "00" flash in the display.
2. Press
and seconds. When the time you set is longer than 60 minutes, the symbol
on the display. The appliance now calculates the time in hours and minutes.
3. The MINUTE MINDER starts automatically after five seconds.
After 90% of the set time, an acoustic signal sounds.
Press a button to stop the signal.
4. When the set time ends, an acoustic signal sounds for two minutes. "00:00" and
flash in the display.
Press a button to stop the signal.
If you set the MINUTE MINDER when the DURATION or END function operates, the symbol
comes on in the display.
FUNCTION
DURATION
END
again and again until the display shows
flashes in the display.
or to set minutes.
to confirm.
or to set the necessary hour.
to confirm.
button during setting hours for DURATION
function.
.
or to set the MINUTE MINDER. At first the time is calculated in minutes
Use only when the oven function is set to set how long the
Use only when the oven function is set to set when the oven
stops. You can use Duration and End at the same time (Time
delay), if the appliance is to be activate and deactivate auto-
or wait 5 seconds for an automatic con-
DESCRIPTION
oven operates.
matically later.
or .
or symbol and time setting
, the appliance goes to set-
comes