Hardware Reset - Octagon Systems XE–700 Reference Manual

Hardware reset

The reset switch (Switch SW1) allows you to reset the system without turning off
the power. This provides a more complete reset than the <CTRL><ALT><DEL>
method.
The RESET command accomplishes the same thing as the reset button. Refer to
the component diagram in the Quick start chapter for the location of the reset
switch, and to Appendix B, Software utilities, for information on the Reset utility.
When using COM1 as the console, the <CTRL><ALT> <DEL>
commands on the host system keyboard only reset the host system.
Use the RESET command to issue a hardware reset on the XE–700
SBC.
WARNING!
83