Main Menu - Octagon Systems XE–700 Reference Manual

Main menu

The Main menu allows you to set the basic system configuration. Default values
are shown in the menu below.
Main Advanced
System Time:
System Date:
Legacy Diskette A:
> Primary Master
> Primary Slave
> Secondary Master
> Secondary Slave
System Memory:
Extended Memory:
↑ ↓ Select Item
F1 Help
→ Select Menu
Esc Exit
System Time:
System Date:
Legacy Diskette A:
>Primary Master
>Primary Slave
>Secondary Master Same as Primary Master. Note that the XE–700 SBC only supports three
>Secondary Slave
System Memory:
Extended Memory: Displays the amount of extended memory on the card.
PhoenixBIOS Setup Utility
Boot Exit
[00:00:36]
[01/01/1988]
[Disabled]
[None]
[None]
[None]
[None]
640 KB
64000 KB
-/+ Change Values
Enter Select > Sub-Menu
Sets the time for the system clock.
Sets the date for the system clock.
Enables or disables a legacy floppy disk drive. Choices are Disabled, 360
KB 5 ¼", 1.2 MB 5 ¼", 720 KB 3 ½", 1.44/1.25 MB 3 ½", 2.88 MB 3 ½".
Accesses submenu for a Primary Master disk drive. Options are None, CD-
ROM, ATAPI Removable, IDE Removable, Other ATAPI, User, and Auto.
This channel is hardwired to the CompactFlash, and cannot be used for
other devices.
This channel is reserved and cannot be used.
IDE devices total (CompactFlash as primary Master and two Secondary
devices.)
Same as Primary Master. Note that the XE–700 SBC only supports three
IDE devices (CompactFlash as primary Master and two Secondary devices.)
Displays the amount of system memory which is on the card.
Item Specific Help
<Tab>, <Shift-Tab>, or
<Enter> selects field.
F9 Setup Defaults
F10 Save and Exit
31