Table of Contents
Advertisement
Organization of banks
The I/O digital bank has a total of 24 I/O lines connected to a 26-pin header. The
lines are configured into three groups: ports A, B and C, each group consisting of 8
bits. Any of the lines at ports A, B or C can be configured individually as inputs or
outputs.
Figure 9–2
Organization of banks
Base
120h
Base + 1
121h
Base + 2
122h
Base + 3
123h
Port addressing
Ports A, B, C and the control register are addressable. The base I/O address is fixed
at address 120h. Ports A, B, C and the control register are addressable, with
reference to the base address.
I/O lines pulled low
The I/O lines at ports A, B, and C are always pulled low. This allows a known state
upon powerup. 10K ohm resistor networks are used to configure the I/O lines as
low.
64
Port A
8
Port B
8
8
Port C
Control
Register
J9, Digital I/O
Advertisement
Table of Contents
