Ethernet - Octagon Systems XE–700 Reference Manual

Ethernet

One 10/100BaseT port supporting IEEE 802.3
Video
Supports CRTs displays with resolutions up to 1280 x 1024 x 24 bpp, and TFT flat
panel displays with resolutions up to 1024 x 1024 x 18 bpp.
Watchdog timer
Time-out periods of 1, 10 or 60 seconds. Strobed through built–in, enhanced INT
17h function calls.
Real time clock
AT compatible with external battery backup.
Expansion
PC/104
Operating systems
Compatible with Windows CE.net, Linux, QNX, and DOS.
PCI bus mastering
Bus mastering is not supported
Power requirements
5V ±0.25V; 1.6 Amps @ 133 MHz
Note It is extremely important to select a supply that ramps up in 10ms or less. This
assures that all the circuitry on the XE–700 SBC sequences properly and avoids
system lockup.
Environmental specifications
Operating temperature
Nonoperating temperature
Relative humidity
Shock
Vibration
Size
115 mm x 165mm x 29.5 mm, EPIC™ form factor
Weight
6 oz.
Excessive thermal stress
This card is guaranteed to operate over the published temperature ranges and
relevant conditions. However, sustained operation near the maximum temperature
specification is not recommended by Octagon or the CPU chip manufacturer due to
well known, thermal related, failure mechanisms. These failure mechanisms,
common to all silicon devices, can reduce the MTBF of the cards. Extended
operation at the lower limits of the temperature ranges has no limitations.
104
–40° to +85°C; Octagon recommends the
conductive cooling kit for prolonged operation
near the upper limit.
–55° to 95°C, nonoperating
5% to 95% noncondensing
40g, 3 axis
5g, 3 axis