Advanced Menu - Octagon Systems XE–700 Reference Manual

Advanced menu

The Advanced menu allows you to set advanced system configuration. Note that if
items are incorrectly set in this menu, the system might malfunction. Default
values are shown in the menu below.
Main Advanced
Setup Warning
Setting items on this menu to incorrect
values may cause your system to malfunction.
Serial Video:
Baud Rate:
Boot-time Diagnostic Screen:
QuickBoot Mode
Installed O/S:
Reset Configuration Data:
>I/O Device Configuration
>Chipset Configuration
Watchdog:
↑ ↓ Select Item
F1 Help
→ Select Menu
Esc Exit
Serial Video:
Baud Rate:
Boot-time Diagnostic Screen:
QuickBoot Mode:
Installed O/S:
Reset Configuration Data: Yes or No. Yes erases all configuration data in a section of memory
Watchdog:
PhoenixBIOS Setup Utility
Boot Exit
[Enabled]
[38.4K]
[Disabled]
[Disabled]
[Other]
[No]
[Disabled]
-/+ Change Values
Enter Select > Sub-Menu
Enabled, Disabled. Enables redirection of video and keyboard to
COM1.
9600, 19.2K, 38.4K, 57.6K, 115K. Selects baud rate for serial
console.
Disabled, Enabled. Displays the diagnostic screen during boot.
Enabled, Disabled. When disabled, allows the system to skip
certain tests during boot. This decreases the time needed to boot
the system.
` Other, Win2000, WinMe, Win98, Win95. Selects the operating
system you use most often. Note that the XE–700 only has 64MB
ram, and might not support some versions of Windows.
for ESCD (Extended System Configuration Data) which stores the
configuration settings for non-PnP plug in devices. Select Yes when
required to restore the manufacturer's defaults.
Enabled, Disabled. Enables watchdog timer.
Item Specific Help
Enables redirection of
video and keyboard to
serial port COM1.
F9 Setup Defaults
F10 Save and Exit
33