Octagon Systems XE–700 Reference Manual page 28

4. If using a CompactFlash, install it into the CompactFlash socket.
5. Apply power to the XE–700 SBC system. A logon message similar to the one
below will appear on your PC monitor:
Copyright 1985-2001 Phoenix Technologies Ltd.
All Rights Reserved
Octagon Systems: XE–700 V1.00
CPU =Cyrix CX486DX2 133MHz
637K System RAM Passed
62M Extended RAM Passed
System BIOS shadowed
Video BIOS Shadowed
6. Enter Setup by pressing the F2 key during BIOS POST sequence (this occurs
between the memory test and bootup).
Main Advanced
System Time:
System Date:
Legacy Diskette A:
> Primary Master
> Primary Slave
> Secondary Master
> Secondary Slave
System Memory:
Extended Memory:
↑ ↓ Select Item
F1 Help
→ Select Menu
Esc Exit
Note Your display message may be slightly different
7. Configure the CD-ROM as a master device in BIOS Setup, and change the boot
sequence to CD-ROM drive first. Save the changes and exit Setup.
8. Insert the operating system media into the CD-ROM drive.
9. Reboot the system. The system should boot to the CD-ROM.
10. Follow the on-screen dialog to load the operating system. Refer to the OS
documentation for further information.
28
PhoenixBIOS Setup Utility
Boot Exit
[00:00:36]
[01/01/1988]
[Disabled]
[None]
[None]
[None]
[None]
640 KB
64000 KB
-/+ Change Values
Enter Select > Sub-Menu
Item Specific Help
<Tab>, <Shift-Tab>, or
<Enter> selects field.
F9 Setup Defaults
F10 Save and Exit