Figure 2-21. Preparing The Pole Bracket - Comtech EF Data CSAT-5060 Installation And Operation Manual

100W C-Band Transceiver
Installation
2.6.2.2 A R
SSEMBLE EDUNDANT
1. Place Unistrut bracket (1, Figure 2-1) on a flat surface.
2. Slide two springnuts (9) into the channel of the Unistrut bracket.
3. Fasten two pipe blocks (11) loosely to the springnuts using two bolts (6), two
flat washers (7), and two splitlock washers (8).
4. Repeat procedure for second Unistrut bracket (1)
5. Position Unistrut bracket (1) with pipe blocks (11) against the mounting pole,
slide the pipe blocks (11) until they contact the mounting pole.
6. Ensure the pipe blocks (11) are centered to the Unistrut brackets (1).
7. Tighten the hardware.
C
ONFIGURATION
2-22
. Preparing the Pole Bracket
Figure 2-21
Revision 0
MN/CSAT5060100.IOM