Comtech EF Data CSAT-5060 Installation And Operation Manual page 7

Comtech EF Data Documentation Update
Subject:
Date:
Document:
Part Number:
Collating Instructions:
Comments:
Revised Important Note and step 6 to read:
IMPORTANT
6. Position TRF Filter (customer-selectable), gasket (11, Figure 2-11), and
support bracket (Figure 2-12) on Port 4 of switch (5, Figure 2-11) and secure
with eight bolts (3, Figure. 2-12), lock washers (2), and flat washers (1) from
AS/0502 kit, and use 2 bolts (7, Figure 2-11), lock washers (8), and flat
washers (12) from AS/438 kit.
Filename: T_ERRATA
Errata C
Revised Assembly Procedures for TRF Filter
September 17, 2002
CSAT5060 100Watt, C-Band Transceiver, Installation and
Operation Manual, Rev. 0, dated June 7, 2002
MN/C5060100.EC0
Attach this page to page 2-14
Ensure that the OUTPUT flange of the filter is against switch (5).
TRF Filter is Customer-Selectable at time of ordering.
1