Comtech EF Data CSAT-5060 Installation And Operation Manual page 92

100Watt C-Band Transceiver
Redundant Systems
B.2.1.7 R IF I
X NTERFACES
The Rx IF output signal is fed to the customers equipment from the RSU-5060 at connector J9. The RSU-
5060 contains a power combiner which takes the IF input signals from both CSAT A and CSAT B via the
J10 and J11 connectors and provides a single output signal at J9. The IF output power at J9 will nominally
be 3dBm less than the IF input power at either J10 or J11.
B.2.2 M
ECHANICAL
The RSU-5060 is housed in a weather resistant, sealed aluminum housing with five
external circular connectors and six Female N-Type connectors. The mechanical
dimensions and mounting interface are shown in Figure 1-2.
, J9 – J11
I
NTERFACE
B-6
Revision 0
MN/CSAT5060100.IOM