Chapter 1. Introduction; Functional Description - Comtech EF Data CSAT-5060 Installation And Operation Manual

1.1 F
UNCTIONAL
The Transceiver is designed for use in communication systems, or in satellite uplink data
systems, for the reception of SCC/MCPC, DAMA, and TDMA communication signals.
It also can be used in communications system applications with full transponder HDTV
and analog TV.
Note: The Product Data Sheet is included in the chapter.
The converter is environmentally sealed and is designed to be hard mounted on or near
the antenna structure. A covered cooling fan is mounted on the outside of the unit to
maintain a reduced operating temperature for enhanced reliability.
The Downconverter RF input connector is wired to supply DC voltage to an LNA.
This voltage is capable of damaging any test equipment connected to the
connector. Do not connect test equipment to this connector without a coaxial DC
WARNING
block between the connector and the test equipment.
D
ESCRIPTION
INTRODUCTION
CSAT-5060
100W C-Band Transceiver
1–1
Chapter 1.