Energy Save Mode - Miele H6860BP Operating And Installation Instructions

Using residual heat
 The temperature in cooking
programmes using temperatures
above 140 °C which take longer than
30 minutes can be turned down to
the lowest possible temperature
about 5 minutes before the end of
cooking. The residual heat is
sufficient to complete the cooking
process. Do not switch the oven off
(see "Warning and safety
instructions").
 If you have set a duration for a
cooking programme, the oven
heating elements will switch off
automatically shortly before the end
of cooking and
will appear in the display. The
residual heat in the oven is sufficient
to complete the cooking process.
 If you are using the Miele food probe
to cook food, the oven heating
elements will switch off automatically
shortly before the end of cooking.
The residual heat in the oven is
sufficient to complete cooking and
Energy saving phase
display.
 If you wish to run the Pyrolytic
cleaning programme, it is best to start
it immediately after a cooking
programme. The residual heat in the
oven will help reduce the amount of
energy required to run the
programme. To avoid soiling baking
on the door, ensure you remove any
soiling from it before running the
Pyrolytic cleaning programme.
Energy saving phase
will appear in the
Tips on saving energy
Settings
 Switch the clock display off if you
wish to reduce energy usage (see
"Settings").
 Set the oven lighting so that it
switches off automatically during a
programme after 15 seconds. It can
be switched on again at any time by
touching .

Energy save mode

 The oven will switch itself off
automatically to save energy if a
programme is not being run and
controls have not been operated. The
time of day will appear in the display
or the display will remain dark (see
"Settings").
57