Injecting Bursts Of Steam; Automatic Burst Of Steam; 1, 2 Or 3 Bursts Of Steam - Miele H6860BP Operating And Installation Instructions

Moisture Plus 

Injecting bursts of steam

Steam can cause scalding.
Do not open the door during bursts
of steam. Also, condensation on the
sensors will cause them to have a
slow reaction time.

Automatic burst of steam

Automatic burst of steam
display.
Once the heating-up phase has been
completed, the automatic burst of
steam is injected.
The water will vaporise in the oven
whilst steam is being released and
of steam active will appear in the display.
After the burst of steam
finished , will appear in the display.
 Continue cooking until the end of the
cooking duration.
70
appears in the
Burst
Burst of steam

1, 2 or 3 bursts of steam

Manual bursts of steam
When Manual has been selected, you
can trigger bursts of steam once
Manual burst of steam
Please wait until the heating-up phase
is completed to allow the steam to be
distributed evenly by the warm air in
the oven.
Useful tip: See the recipe book for tips
on when to release the bursts of steam.
Use the minute minder  to remind you
when to release them.
 Select
Start Manual burst of steam
The burst of steam will be released and
Burst of steam active
display.
 Proceed as described to inject further
bursts of steam.
Burst of steam finished
display after each burst of steam.
 Continue cooking until the end of the
cooking duration.
Time-controlled bursts of steam
The oven will release the steam after
the specified amount of time.
Start
appears.
.
will appear in the
will appear in the