Operation; Tips On Saving Energy; Residual Heat Use; Energy Save Mode - Miele H6860BP Operating And Installation Instructions

Operation

Tips on saving energy

– Remove any accessories from the
oven that you do not require for
cooking.
– Pre-heat the oven only if instructed to
do so in the recipe or the cooking
chart.
– Avoid opening the door during
cooking.
– In general, if a range of temperatures
is given, it is best to select the lower
temperature and to check the food
after the shortest given time.
– Use Fan plus U as you can cook at
temperatures 10–30 °C lower than
when using other functions.
– Fan grill \ can be used for a wide
variety of food. With Fan grill you can
use lower temperatures than with
other grill functions which use the
maximum temperature setting.
– Your oven will use as little energy as
possible if you set the time of day
display to "Time - Display - Off".
– In the factory default setting of
"Lighting – On for 15 seconds" the
oven lighting will switch off
automatically after 15 seconds if a
programme is running. Touch I at
any time to switch the light back on.
56

Residual heat use

The oven heating will switch off
automatically shortly before the end of
a cooking process for which an auto-
matic switch-off time has been set or
which is using the food probe.
Cooking continues using residual heat.
The heat in the oven is sufficient to
complete the cooking process.
"Energy save phase" will appear in the
display. The cooling fan continues to
run, as does the hot air fan if a function
which uses the fan has been selected.

Energy save mode

The oven will switch itself off
automatically to save energy if no other
action is taken within a certain time
frame after switching it on or after the
end of a cooking programme.
The time when this happens will
depend on the selected settings
(function, temperature and duration).
The time of day will be displayed or the
display will remain dark (see "Settings -
Time - Display").