Miele H6860BP Operating And Installation Instructions page 30

Features
Fitting and removing the FlexiClip
telescopic runners

Danger of burning!
Make sure the oven heating
elements are switched off and the
oven interior is cool.
The FlexiClip telescopic runners are
fitted in between the two rails that make
up a shelf level.
The telescopic runner with the Miele
logo must be fitted on the right.
When fitting or removing the
telescopic runners, do not extend
them.
 Hook the FlexiClip telescopic runner
onto the bottom rail of a shelf level at
the front (1.) and push it along the rail
into the oven interior (2.).
30
 Then secure the telescopic runner to
the bottom of the two rails as
illustrated (3).
If the telescopic runners are difficult
to pull out after fitting, you may need
to pull firmly on them once to release
them.
To remove a FlexiClip telescopic runner:
 Push the FlexiClip telescopic runner
all the way in.
 Remove the FlexiClip telescopic
runner by raising it at the front (1)
then pulling it forwards along the rail
and out (2).