Starting Residual Moisture Evaporation Immediately; Skipping Residual Moisture Evaporation - Miele H6860BP Operating And Installation Instructions

Moisture Plus 
Starting residual moisture
evaporation immediately
Steam can cause scalding.
Do not open the door while the
residual water is being evaporated.
 Select the Moisture Plus  function
or an Automatic programme that uses
moisture.
Evaporate residual moisture?
the display.
 Select
Yes.
Evaporate residual moisture
then appear in the display.
The evaporation process will begin. The
duration will count down in the display.
The duration displayed depends on the
amount of water in the system. During
the evaporation process, this duration
may change depending on how much
water is present.
At the end of the residual water
evaporation process
appears:
 Touch .
A cooking process using the Moisture
Plus  function or an Automatic
programme with moisture can now be
carried out.
The moisture will condense on the
door and in the oven compartment
and needs to be wiped off after the
oven has cooled down.
72
appears in
and a time
Process finished
Skipping residual moisture
evaporation

Skipping the residual moisture
evaporation process can, in certain
cases, cause water to overflow into
the oven cavity.
It is best not to cancel the
evaporation process.
 Select the Moisture Plus  function
or an Automatic programme that uses
moisture.
Evaporate residual moisture?
the display.
 Select
.
Skip
A cooking process using the Moisture
Plus  function or an Automatic
programme with moisture can now be
carried out.
You will be prompted to carry out the
residual moisture evaporation process
the next time you select the Moisture
Plus  function, or an Automatic
programme that uses moisture and
when you turn the oven off.
appears in