Yamaha aventage RX-A3070 Owner's Manual page 148

■ Max Volume
Sets the limit value of the volume.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
■ Initial Volume
Sets the initial volume when the receiver is turned on.
Settings
Off Sets the level to the volume level of the unit when it last entered standby mode.
Sets at Mute or the specified volume level (-80.0 dB to +16.5 dB, 0.5 dB
increments).
On
(Specify a volume level which is lower than the "Max Volume" setting.)
■ Pure Direct Mode
Selects whether to output video signals during the Pure Direct mode (p.83).
Settings
Automatically outputs video signals when any videos are input from the selected
Auto input source or an input source that can be operated with the on-screen display is
selected. When no video signals are input, the wall paper is displayed.
Video Off Does not output video signals including the wall paper.
■ Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level.
Settings
Off Does not adjust the effect level automatically.
Adjusts the effect level automatically according to the YPAO measurement results
On
and the volume level.
■ CINEMA DSP 3D Mode
Enables/disables CINEMA DSP HD
functions with the selected sound programs (except 2ch Stereo and 9ch Stereo).
Settings
Off Disables CINEMA DSP HD
On Enables CINEMA DSP HD
■ Virtual Presence Speaker
Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and surround
speakers. When VPS is enabled, the unit creates front VPS when no front presence speakers are
connected, and creates rear VPS when front presence speakers are connected but no rear
presence speakers (p.79).
Settings
Off Disables Virtual Presence Speaker (VPS).
On Enables Virtual Presence Speaker (VPS).
X
Depending on the installation height of the surround speakers, VPS may not be effective. In this case, set "Virtual
Presence Speaker" to "Off".
■ Virtual Surround Back Speaker
Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers.
When VSBS is enabled, the unit creates VSBS when no surround back speakers are connected.
Settings
Off Disables Virtual Surround Back Speaker (VSBS).
On Enables Virtual Surround Back Speaker (VSBS).
X
VSBS is effective only when 6.1- or 7.1-channel content is played back.
148
En
3
(p.79). If this function is set to "On", CINEMA DSP HD
3
.
3
.
3