Function - Yamaha aventage RX-A3070 Owner's Manual

Function

Configures the functions that make the unit easier to use.
■ Input Assignment
Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source.
■ Procedure
Example: assigning the OPTICAL (2) jack to the input source "AV 2"
1
Use the cursor keys to select the cell at the intersection of "AV 2" and "Optical", and press ENTER.
2
Use the cursor keys to select "2" and press ENTER.
3
To exit from the menu, press ON SCREEN.
X
You cannot assign both COAXIAL and OPTICAL jacks to the same input source.
■ Remote PROGRAM Key
Assigns the desired function to the PROGRAM keys of the remote control.
For example, when "INPUT Selection" is selected, the PROGRAM keys will operate as the input
switching keys.
Settings
DSP Program
Select a sound program.
Selection
INPUT Selection Select an input source for playback.
NET Selection Select a network source.
Preset Selection Select a registered item (shortcut).
Browse Screen -
Move to the previous/next page of the browse screen list.
1 Page Up/Down
Subwoofer Trim Adjust the subwoofer volume.
Dialogue Level Adjust the volume of dialogue sounds.
qRepeat / wShuffle
Select the repeat/shuffle setting for the USB storage device or media server.
■ Display Set
Configures the settings related to the front display and TV screen display.
Dimmer (Front Display)
Adjusts the brightness of the front display.
Setting range
-4 to 0 (higher to brighten)
Y
The front display may become dark when "ECO Mode" (p.161) is set to "On".
Short Message
Selects whether to display short messages on the TV screen when the unit is operated (such as
input selection and volume adjustment).
Settings
On Displays short messages on the TV screen.
Off Does not display short messages on the TV screen.
158
En