Advanced Setup Menu Items; Changing The Speaker Impedance Setting (Sp Imp.); Selecting The Remote Control Id (Remote Id); Changing The Fm/Am Tuning Frequency Setting (Tu) - Yamaha Aventage RX-A870 Owner's Manual

ADVANCED SETUP menu items

X
Default settings are underlined.
Item
SP IMP. Changes the speaker impedance setting.
REMOTE ID Selects the unit's remote control ID.
(Asia and General models only)
TU
Changes the FM/AM tuning frequency setting.
TV FORMAT Switches the video signal type.
MON.CHK Removes the limitation on HDMI video output.
4K MODE Selects the HDMI 4K signal format.
This setting informs the player about the DTS formats that the unit
DTS MODE
supports.
INIT Restores the default settings.
UPDATE Updates the firmware.
VERSION Checks the version of firmware currently installed on the unit.

Changing the speaker impedance setting (SP IMP.)

LINK MASTER STEREO TUNED ZONE
SLEEP PARTY 2 A
OUT 2 Hi -R es ENHANCER YPAO VOL. A- DRC
ECO
SP IMP.••8¬MIN
Change the unit's speaker impedance settings depending on the impedance of the speakers
connected.
Settings
Select this option when you connect 6-ohm speakers to the unit. You can also use
6 Ω MIN
4-ohm speakers as the front speakers.
8 Ω MIN Select this option when you connect 8-ohm or higher speakers to the unit.
Function
3 B
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR

Selecting the remote control ID (REMOTE ID)

LINK MASTER
OUT 2
ECO
REMOTE ID••ID1
Page
Change the unit's remote control ID so that it matches the remote control's ID (default: ID1).
When using multiple Yamaha AV receivers, you can set each remote control with a unique
136
remote control ID for its corresponding receiver.
136
Settings
136
ID1, ID2
137 ⬛
Changing the remote control ID of the remote control
137
1
To select ID1, hold down the cursor key (e) and SCENE1 together for 3 seconds.
137
To select ID2, hold down the cursor key (e) and SCENE2 together for 3 seconds.
138

Changing the FM/AM tuning frequency setting (TU)

138
138
(Asia and General models only)
138
LINK MASTER
OUT 2
ECO
TU••••FM50/AM9
Change the FM/AM tuning frequency setting of the unit depending on your country or region.
Settings
Select this when you want to adjust the FM frequency by 100-kHz steps and AM by
FM100/AM10
10-kHz steps.
Select this when you want to adjust the FM frequency by 50-kHz steps and AM by
FM50/AM9
9-kHz steps.
136
En
STEREO TUNED ZONE
2 A 3 B
SLEEP PARTY
-R es
Hi ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR
STEREO TUNED ZONE
2 A 3 B
SLEEP PARTY
-R
Hi es ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR