Yamaha aventage RX-A3070 Owner's Manual page 71

SOURCE SOURCE RECEIVER RECEIVER
AV AV
1 1 2 2 3 3 4 4
5 5 6 6 7 7 V-AUX V-AUX V-AUX
AUDIO AUDIO
1 1 2 2 3 3 4 4
PHONO PHONO PHONO BLUETOOTH BLUETOOTH BLUETOOTH USB USB USB NET NET NET
TUNER TUNER TUNER
MAIN MAIN 2 3 4 2 3 4
PARTY PARTY HDMI OUT HDMI OUT
ZONE ZONE
SCENE SCENE
1 1 2 2 3 3 4 4
PROGRAM PROGRAM MUTE MUTE VOLUME VOLUME
ON SCREEN
TOP MENU TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU POP-UP/MENU
ON
OPTION OPTION
SCREEN
Cursor keys
ENTER ENTER
ENTER
RETURN RETURN RETURN DISPLAY DISPLAY
BAND BAND
MODE MODE
TUNING TUNING PRESET PRESET
SUR. DECODE STRAIGHT SUR. DECODE STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER PURE DIRECT ENHANCER PURE DIRECT
INFO INFO SLEEP SLEEP
1 1 2 2 3 3 4 4
5 5 6 6 7 7 8 8
MEMORY MEMORY
9 9 0 0 10 10 10 ENT ENT
TV TV
INPUT INPUT
TV VOL TV VOL TV CH TV CH
MUTE MUTE CODE SET CODE SET
3
Use the cursor keys and ENTER to enter the security key
and select "NEXT".
If you select "None" in Step 2, this setting is not available. Proceed
to Step 4.
If you select "WEP", enter either 5 or 13 character string, or 10 or 26
hexadecimal digits.
If you select other method, enter either 8 to 63 character string, or
64 hexadecimal digits.
4
Use the cursor keys (e/r) to select "CONNECT" and
press ENTER to start the connection process.
When the connection process finishes, "Completed" appears on
the TV screen.
If "Not connected" appears, check that all the information is
entered correctly, and repeat from Step 1.
5
To exit from the menu, press ON SCREEN.
Using the PIN code
If you select "PIN Code" as the connection method, the list of available
access points appears on the TV screen.
1
Use the cursor keys and ENTER to check the desired
access point and select "NEXT".
The PIN code of the unit appears on the TV screen.
2
Enter the unit's PIN code into the wireless router (access
point).
For details on settings, refer to the instruction manual of the
wireless router (access point).
3
Use the cursor keys (e/r) to select "CONNECT" and
press ENTER to start the connection process.
When the connection process finishes, "Completed" appears on
the TV screen.
If "Not connected" appears, repeat from Step 1 or try another
connection method.
4
To exit from the menu, press ON SCREEN.
71
En