Listening To Fm/Am Radio (Except Australia, U.k., Europe And Russia Models); Setting The Frequency Steps - Yamaha aventage RX-A3070 Owner's Manual

Listening to FM/AM radio (except Australia, U.K., Europe and Russia models)

You can tune into a radio station by specifying its frequency or selecting from registered radio
stations.
Y
• The radio frequencies differ depending on the country or region where the unit is being used. The explanation
of this section uses a display with frequencies used in U.S.A. model.
• If you cannot obtain good reception on the radio, adjust the direction of the FM/AM antennas.

Setting the frequency steps

(Brazil, Asia and General models only)
At the factory, the frequency step setting is set to 50 kHz for FM and 9 kHz for AM. Depending
on your country or region, set the frequency steps to 100 kHz for FM and 10 kHz for AM.
1
Set the unit to standby mode.
2
When holding down STRAIGHT on the front panel, press MAIN ZONE z.
MAIN ZONE z
STRAIGHT
PROGRAM
3
Press PROGRAM repeatedly to select "TUNER FRQ STEP".
TUNER FRQ STEP
4
Press STRAIGHT to select "FM100/AM10".
5
Press MAIN ZONE z to set the unit to standby mode and turn it on again.
84
En
FM50/AM9